Unclogging a toilet can be tedious at times. Your bathroom may have an excellent plumbing system. But no matter how efficient it is, your bathroom will still clog. Usually, a plunger comes in handy to unclog a toilet.
But sometimes, this essential tool is missing. Flushing isn’t ever the solution. It will only just make things worse. But there are various other ways to unclog a toilet. And these methods don’t require any additional tools. So, here are the different ways to unclog a toilet and release you from this unsanitary agony-
How to Unclog a Toilet Without a Plunger: 10 Ways to Help You Out
1. Hot Water to the Rescue
This technique is one of the most typical ways of unclogging a toilet in the absence of a plunger. The simple requirement is a bucket. This bucket should be significant to hold enough water, depending upon the severity of the situation.
Make sure to pour hot water and not to boil water. You don’t want the toilet bowl to crack. Pour the water all at once and let it sink inside. In a few minutes, your toilet should be unclogged.
2. Using Dish Soap
Every house has a dish soap. The moment you see your toilet clogging, quickly fetch some dish soap from your kitchen. Squeeze a considerable amount of the detergent into the toilet bowl, depending on how clogged your toilet is.
The chemicals in the dish soap will break down the material. It will also lubricate the matter for easy passage. To increase the chances of unclogging, you can add hot water. Let it remain for a few minutes to do its job. Although, in worst-case scenarios, it might take the soap the entire night to unclog the toilet.
3. Epsom Salts Are Effective
This method can rescue you from embarrassing situations at your friend’s place. Toilets can betray you. But instead of asking for dish soap or hot water, you can use their bath bombs. Epsom salts may also work in this case.
Just add some Epsom salt or an extra bath bomb to the toilet and let it work its magic. Usually, shampoo is a better option because it may work faster. But Epsom salts can also get the job done.
4. Use a Wire Hanger
Using a wire hanger for unclogging a toilet is undoubtedly an unconventional method. But contrary to popular belief, a wire hanger can quickly get the job done. Fetch a wire hanger from your closet. In this situation, a wire hanger with a plastic coating is ideal. Unwind the wire hanger and straighten it as much as you can.
It may require a bit of strength if the wire hanger is rigid. Insert this straightened hanger into the solids clogged in your toilet. Breaking down the solids into smaller chunks can help them pass through. It may not be the best method for certain people, but it proves to be quite helpful.
5. Toilet Brush to the Rescue
If a wire hanger is not comfortable for you to use, a toilet brush is a great alternative. The procedure is the same. You need to grip the toilet brush and move through the solid matter. This will help breakdown the chunks.
Yes, the idea is gross but, in such situations, you can get the job quickly done. Plus, a toilet brush doesn’t need any unwinding, unlike a wire hanger. And every toilet contains a toilet brush. So, this method is easy to execute.
6. Bleach and Powdered Dish Detergent
There are times when all the above solutions may not work. In such cases, a mixture of bleach and powdered dish detergent. But the ration is essential.
The ideal mix contains two bowls of bleach and one bowl of powdered dish detergent. Add this mixture to the clogged toilet bowl and wait for the job to get done. It will take approximately 20-30 minutes and let the chemicals do the magic.
7. Vinegar and Baking Soda
If bleach and powdered dish detergent aren’t working out, there are other chemicals to unclog the toilet effectively. This mixture is not regularly used, but it works wonders due to its composition.
This mixture contains a cup of baking soda and two cups of vinegar. The chemicals in the mixture breakdown the matter and allow easy passage of the solids through the opening. You can also add hot water to speed-up the unclogging process.
8. A Plastic Bottle Can Be of Help
In case you have added an excess of water to unclog the toilet, you need to remove it to allow this process to work. Fill a plastic bottle with warm or hot water. Take your thumb and press the container from the top.
Invert the bottle to create pressure. Make sure to block the entrance with your thumb. Move the box near the clog and immediately release the thumb. A gush of water will enter the bowl due to the created pressure. This pressure will help breakdown the large chunks into small pieces for easy passage.
9. Squirt Gun with Pressure
Using a plastic bottle and creating pressure may not be easy for some people. To simplify things, a faucet or a squirt gun is a better option. The water gushes out of the valve with high pressure.
So, you need to locate the clog and move the faucet to that area. Press to squirt gun to release the water. This pressure is more effective in breaking down the solid matter. A tap can be of great help in such situations.
10. Using Drain Cleaner
This method is considered to be the last resort. The chemicals used can harm the environment, your skin, and deteriorate the walls of the toilet bowl. Hence, it isn’t frequently recommended.
You need to pour the entire bottle of drain cleaner into the toilet bowl. If you think that the clog cannot be softened, you may need to call the plumber. But in extreme cases, this method may come in handy.
Unclogging a toilet can be a tedious job, especially when your plunger is missing. But the methods as mentioned earlier make may change your life simpler. All these materials are readily available at home and can get the job done effectively!
Continue Reading: Doorless Walk-in Shower Ideas